An Innovative Manufacturer--Supply One Stop Customized Solution of Industrial Automation Equipments Since 2008

PST  > 

AI - Page Sitemap

 > 

high quality auto feed rivet gun factory for electric power tools

high quality auto feed rivet gun factory for electric power tools

high quality auto feed rivet gun factory for electric power tools
  • high quality auto feed rivet gun factory for electric power tools
  • high quality auto feed rivet gun factory for electric power tools

high quality auto feed rivet gun factory for electric power tools

Introduction:
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:

Introduction:

700-C2 riveting gun is only applicable when the factory is attached with the applicable size of the nail nozzle, the jaw box head and the jaws and the jaw pusher. 

Before confirming that these fixtures are fixed, the correct parts of these fixtures must be confirmed. And size.

It is advantageous to clean the jaws every 2 to 3 days while the tool is in continuous use, and depending on the number of rivets being fixed, approximately every 3,000 rivets.

The steps to remove the jaws are as follows:

1. Untie the supply of air.

2. Use a screw wrench to loosen the structure of the head and clean the inside of the head frame.

3. Hold the lock nut of the jaw box, unscrew the jaw box, and use the screw wrench from the oil plug to reopen the washer of the lock nut.

4. Release the jaw head from the jaw box and remove the jaw pusher spring, jaw pusher and a jaw.

5. Jaws, jaw thrusters, jaw thruster springs, and jaw box heads. Now use the brush to clean all debris. If it is worn or damaged, replace these parts.

6. The mechanical mechanism of the oil has good quality oil. We strongly recommend that you apply 081 brand jaw oil on the back of the jaw.

081 brand jaw oil is effective for application.


How to maintain it?

Please specify 1/8” (3.2mm), 5/32 (4.0mm) and 3/16” (4.8mm)

The rivet is mounted with a simple change of the nail device without any other changes.

Connect the tool train to the air supply, hold the trigger and press down to know that the nail tip device is loose, reinstall and re-lock; the nail head device can also be changed via the loose head frame.

Since the tool is out of the factory, a moderately sized jaw pusher and jaw tablet and jaw head box have been installed.

Jaw pusher

2. Pliers piece

3. Jaw box

4. Change the steps in the jaw statement maintenance. These parts are included in the tool.


high quality auto feed rivet gun factory for electric power tools-1


Using Tips:

Before using, observe the tail end of the retracting hole of the rivet machine to ensure that the claw piece group is opened and the hole is in a state of round hole.

The rear duct should be completely screwed into the oil piston tube, and then locked with the loose nut in reverse rotation; the front and rear ducts are also threaded and should be fully screwed in.

 If the brake ring bayonet cannot be aligned at the same time After the clamping position of the rear catheter, the front catheter can be rotated slightly in the opposite direction to match the brake ring. 

Note: The front tube should not be loosened more than one circumference in the opposite direction.

high quality auto feed rivet gun factory for electric power tools-2



Using such design, the goal for auto feed rivet gun is achieved while meeting the requirements on auto feed rivet gun. Easy Connection at Industrial Sites is the pursuit of APTEK
The new type of electric rivet gun designed by our engineers is very ingenious and practical. APTEK has guaranteed the applications of connectors in food & beverage, chemicals, wood, LED lighting, etc
Measured data indicates that electric rivet gun meets the requirements of auto feed rivet gun. APTEK has been developing and manufacturing industrial cable connectors for 9 years
We adopt technology of auto feed rivet gun , which is introduced from abroad. APTEK, founded in 2009, focuses on developing connectors & sensors
The body frame lightweight design of auto feed rivet gun have the extremely vital significance. At APTEK, there are highly efficient production lines for cable cutting, soldering, crimping, etc
This product brings many economic benefits to customers and is believed to be more widely used in the market. The modern industrial production at APTEK has increased safety, reliability, and rapid installation
This product quality is guaranteed, and has a number of international certification, such as ISO certification. APTEK has been developing and manufacturing industrial cable connectors for 9 years
Strict testing: its current performance has been tested by third parties. It is also ready to be tested by users and will be continuously updated. The modern industrial production at APTEK has increased safety, reliability, and rapid installation
This product is durable and suitable for long-term use and storage. At APTEK, certificates such as ROHS and UL are strong evidence of our capabilities
This product is known for its excellent performance and long service life. APTEK has been developing and manufacturing industrial cable connectors for 9 years
The product has excellent performance and stable quality. At APTEK, certificates such as ROHS and UL are strong evidence of our capabilities
The product leads to a lower amount of money spent on purifying clean water. This can add up to considerable cost savings in the long run. At APTEK, there are highly efficient production lines for cable cutting, soldering, crimping, etc
This product is often used as an ingredient in the manufacturing of consumer products such as electronic or transportation products or used in the construction. APTEK makes sure that each connector matches different environmental standards in all countries
The product is great for places where lights are cycled on and off quickly because it is able to provide full light right away. APTEK makes sure that each connector matches different environmental standards in all countries
The product is ideal for pharmaceutical production, micro-electronics or any application where mineral-free water is needed. APTEK has guaranteed the applications of connectors in food & beverage, chemicals, wood, LED lighting, etc
One of our customers said:' So far I've worn it twice for 12 hours each time with no issues so I can see myself wearing it on a regular basis.' A total of 11 steps are built for custom service at APTEK such as technical feasibility analysis
People all praise that not only can this product be used repeatedly, but it generates less waste over the long-term. APTEK could provide customers with safe, reliable, and easy-installed connectors
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...