An Innovative Manufacturer--Supply One Stop Customized Solution of Industrial Automation Equipments Since 2008

PST  >  AI - Page Sitemap  >  high speed auto rivet gun wholesale for industry
high speed auto rivet gun wholesale for industry

high speed auto rivet gun wholesale for industry
  • high speed auto rivet gun wholesale for industry
  • high speed auto rivet gun wholesale for industry

high speed auto rivet gun wholesale for industry

Shenzhen Pigeon Smart Automation Co.,Ltd is an enterprise specializing in the production and provision of comprehensive services.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. auto rivet gun 's service life is prolonged than common Auto Feed Rivet Gun. Its output is up to 1,000 pieces per month
2. The price of this product is competitive and is widely used by people in all fields. The machine stands out with its low-cost maintenance
3. It does not have metal burrs on its surface. It is treated under mechanical stamping and honing which effectively improve its surface smoothness. The machine has a good water-proof property
4. This product has the required safety. Different requirements regarding architecture and risk classification of this product have been considered carefully in the manufacture. The machine helps reduce staff injuries in the manufacturing process
5. The product has excellent hardness. It has gone through final heat treatment process which aims to improve general mechanical performance. Made of stainless steel, it has premium corrosion resistance

Introduction:

700-C2 riveting gun is only applicable when the factory is attached with the applicable size of the nail nozzle, the jaw box head and the jaws and the jaw pusher. Before confirming that these fixtures are fixed, the correct parts of these fixtures must be confirmed. And size.


It is advantageous to clean the jaws every 2 to 3 days while the tool is in continuous use, and depending on the number of rivets being fixed, 

approximately every 3,000 rivets.


The steps to remove the jaws are as follows:

1. Untie the supply of air.

2. Use a screw wrench to loosen the structure of the head and clean the inside of the head frame.

3. Hold the lock nut of the jaw box, unscrew the jaw box, and use the screw wrench from the oil plug to reopen the washer of the lock nut.

4. Release the jaw head from the jaw box and remove the jaw pusher spring, jaw pusher and a jaw.

5. Jaws, jaw thrusters, jaw thruster springs, and jaw box heads. Now use the brush to clean all debris. If it is worn or damaged, replace these parts.

6. The mechanical mechanism of the oil has good quality oil. We strongly recommend that you apply 081 brand jaw oil on the back of the jaw.

081 brand jaw oil is effective for application.


How to maintain it?

Please specify 1/8” (3.2mm), 5/32 (4.0mm) and 3/16” (4.8mm)

The rivet is mounted with a simple change of the nail device without any other changes.

Connect the tool train to the air supply, hold the trigger and press down to know that the nail tip device is loose, reinstall and re-lock; the nail head device can also be changed via the loose head frame.

Since the tool is out of the factory, a moderately sized jaw pusher and jaw tablet and jaw head box have been installed.

Jaw pusher

2. Pliers piece

3. Jaw box

4. Change the steps in the jaw statement maintenance. These parts are included in the tool.


high speed auto rivet gun wholesale for industry-1


Using Tips:

Before using, observe the tail end of the retracting hole of the rivet machine to ensure that the claw piece group is opened and the hole is in a state of round hole.

The rear duct should be completely screwed into the oil piston tube, and then locked with the loose nut in reverse rotation; the front and rear ducts are also threaded and should be fully screwed in. If the brake ring bayonet cannot be aligned at the same time After the clamping position of the rear catheter, the front catheter can be rotated slightly in the opposite direction to match the brake ring. Note: The front tube should not be loosened more than one circumference in the opposite direction.

high speed auto rivet gun wholesale for industry-2



Company Features
1. Shenzhen Pigeon Smart Automation Co.,Ltd is an enterprise specializing in the production and provision of comprehensive services.
2. We have our own design team and the engineering development team. They have strong design and development capabilities and a profound understanding of the product and market trends. This makes them continuously introduced new distinctive products.
3. Shenzhen Pigeon Smart Automation Co.,Ltd continues to develop its corporate culture based on auto rivet gun . Call!
The overall performance of PST Auto Feed Rivet Gun will be assessed by professionals. The product will be assessed whether its style and color match the space or not, its actual durability in color retention, as well as structural strength and edge flatness.
PST auto rivet gun is manufactured under a range of steps. It needs to be designed, molded, shaped and finished on the basis of collection and analysis of different foot types.
PST Auto Feed Rivet Gun has been designed considering many important factors. They are slip and impact resistance, wear resistance, flex resistance, and odor resistance.
The fabrics of PST Auto Feed Rivet Gun are of high quality. They have to go through necessary finishing processes including dyeing, printing, and heat setting.
In the design of PST Auto Feed Rivet Gun, various concepts regarding furniture configuration have been thought of. They are the law of decoration, the choice of main tone, space utilization and layout, as well as symmetry and equilibrium.
This product is vigilantly examined by our quality testing department.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...