An Innovative Manufacturer--Supply One Stop Customized Solution of Industrial Automation Equipments Since 2008

PST  >  AI - Page Sitemap  >  PneumaticRiveting Gun P700-C2 Compatible with 3.2mm to 4.8mm Blind Rivets Retail Package
PneumaticRiveting Gun P700-C2 Compatible with 3.2mm to 4.8mm Blind Rivets Retail Package

PneumaticRiveting Gun P700-C2 Compatible with 3.2mm to 4.8mm Blind Rivets Retail Package

Brand Name
PST
MOQ
1
Material
Metal
Place of Origin
China
Supply Ability
10000pcs/Month
Packaging Details
Retail package
Payment terms
T/T,Paypal,Western Union
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The design of PST electric rivet gun is strictly carried out. It is carefully designed in terms of its shapes, finishes, textures, tolerances, and dimensions. It is noticeable for long-term service life
2. This product is customizable to suit a diverse range of requirements. It saves more than 50% of labor costs
3. The product has high load driving force. It is able to run smoothly under high pressure, overload, and other rigorous mechanical conditions. The machine has a good water-proof property
4. The product can run uninterruptedly. Its excellent mechanical properties enable it to work stably and reliably all the time without malfunction. The machine helps reduce staff injuries in the manufacturing process

Introduction:

700-C2 riveting gun is only applicable when the factory is attached with the applicable size of the nail nozzle, the jaw box head and the jaws and the jaw pusher. Before confirming that these fixtures are fixed, the correct parts of these fixtures must be confirmed. And size.


It is advantageous to clean the jaws every 2 to 3 days while the tool is in continuous use, and depending on the number of rivets being fixed, 

approximately every 3,000 rivets.


The steps to remove the jaws are as follows:

1. Untie the supply of air.

2. Use a screw wrench to loosen the structure of the head and clean the inside of the head frame.

3. Hold the lock nut of the jaw box, unscrew the jaw box, and use the screw wrench from the oil plug to reopen the washer of the lock nut.

4. Release the jaw head from the jaw box and remove the jaw pusher spring, jaw pusher and a jaw.

5. Jaws, jaw thrusters, jaw thruster springs, and jaw box heads. Now use the brush to clean all debris. If it is worn or damaged, replace these parts.

6. The mechanical mechanism of the oil has good quality oil. We strongly recommend that you apply 081 brand jaw oil on the back of the jaw.

081 brand jaw oil is effective for application.


How to maintain it?

Please specify 1/8” (3.2mm), 5/32 (4.0mm) and 3/16” (4.8mm)

The rivet is mounted with a simple change of the nail device without any other changes.

Connect the tool train to the air supply, hold the trigger and press down to know that the nail tip device is loose, reinstall and re-lock; the nail head device can also be changed via the loose head frame.

Since the tool is out of the factory, a moderately sized jaw pusher and jaw tablet and jaw head box have been installed.

Jaw pusher

2. Pliers piece

3. Jaw box

4. Change the steps in the jaw statement maintenance. These parts are included in the tool.


PneumaticRiveting Gun P700-C2 Compatible with 3.2mm to 4.8mm Blind Rivets Retail Package-1


Using Tips:

Before using, observe the tail end of the retracting hole of the rivet machine to ensure that the claw piece group is opened and the hole is in a state of round hole.

The rear duct should be completely screwed into the oil piston tube, and then locked with the loose nut in reverse rotation; the front and rear ducts are also threaded and should be fully screwed in. If the brake ring bayonet cannot be aligned at the same time After the clamping position of the rear catheter, the front catheter can be rotated slightly in the opposite direction to match the brake ring. Note: The front tube should not be loosened more than one circumference in the opposite direction.

PneumaticRiveting Gun P700-C2 Compatible with 3.2mm to 4.8mm Blind Rivets Retail Package-2



Company Features
1. The production of Auto Feed Rivet Gun is completed in advanced machines.
2. electric rivet gun is the management tenet from the first beginning. Please contact us!
The design process of PST electric rivet gun, including CAD patterning, sewing prototypes, and design layout, is strictly conducted by our professional designers. This product leaves the skin feeling refreshed
PST electric rivet gun is designed by our professional designers who are aware of the ecological factor and apply environmental criteria of the sanitary ware industry to the design. It will not pose a threat to the internal organs of the body
PST electric rivet gun is subject to strict quality management through all its production stages. It has to go through quality treatment such as disinfection, sterilization, dust-free packaging, etc. Its ingredients can keep active over time
PST Auto Feed Rivet Gun is made of quality steel which requires sophisticated processing techniques. For example, the steel has to be cleaned, sandblasted, polished, and acid passivated. All these procedures are carried out by professional technicians. This product is both non-toxic and non-irritating
The materials or parts used in PST Auto Feed Rivet Gun are strictly scrutinized and approved by the professional QC team to comply with the gifts and craft making standards. This product has been sold to more than 200 countries
The quality of this product can be guaranteed by PST. This product contains natural ingredients with a high concentration
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...