An Innovative Manufacturer--Supply One Stop Customized Solution of Industrial Automation Equipments Since 2008

Home  >  PRODUCTS Bulk  >  Customized Automatic Riveting Machine Wholesale  >  Customized Auto Feed Rivet Gun  > 

PST automatic auto rivet gun wholesale for industry

PST automatic auto rivet gun wholesale for industry

PST automatic auto rivet gun wholesale for industry

Brand Name
PST
MOQ
1
Material
Metal
Place of Origin
China
Supply Ability
10000pcs/Month
Packaging Details
Retail package
Payment terms
T/T,Paypal,Western Union
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
industrial automation machines's outstanding quality is shown in the details.Pigeon Smart Automation's industrial automation machines is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a product is up to customers' needs for a highly cost-effective product.
Product Comparison
automatic riveting machines has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.Compared with similar products, Pigeon Smart Automation's automatic riveting machines has the following advantages.
Company Advantages
1. The quality of PST auto rivet gun is ensured absolutely correct. Our quality control team spare no efforts on every step, material production, assembly, quality inspection and packaging to get this result.
2. Our Auto Feed Rivet Gun have won a high admiration and is widely trusted at home and abroad for its well-produced crafts.
3. The product has been and continues to be one of the most popular products in the industry.
4. The product has increasing popularity among customers.

Introduction:

700-C2 riveting gun is only applicable when the factory is attached with the applicable size of the nail nozzle, the jaw box head and the jaws and the jaw pusher. Before confirming that these fixtures are fixed, the correct parts of these fixtures must be confirmed. And size.


It is advantageous to clean the jaws every 2 to 3 days while the tool is in continuous use, and depending on the number of rivets being fixed, 

approximately every 3,000 rivets.


The steps to remove the jaws are as follows:

1. Untie the supply of air.

2. Use a screw wrench to loosen the structure of the head and clean the inside of the head frame.

3. Hold the lock nut of the jaw box, unscrew the jaw box, and use the screw wrench from the oil plug to reopen the washer of the lock nut.

4. Release the jaw head from the jaw box and remove the jaw pusher spring, jaw pusher and a jaw.

5. Jaws, jaw thrusters, jaw thruster springs, and jaw box heads. Now use the brush to clean all debris. If it is worn or damaged, replace these parts.

6. The mechanical mechanism of the oil has good quality oil. We strongly recommend that you apply 081 brand jaw oil on the back of the jaw.

081 brand jaw oil is effective for application.


How to maintain it?

Please specify 1/8” (3.2mm), 5/32 (4.0mm) and 3/16” (4.8mm)

The rivet is mounted with a simple change of the nail device without any other changes.

Connect the tool train to the air supply, hold the trigger and press down to know that the nail tip device is loose, reinstall and re-lock; the nail head device can also be changed via the loose head frame.

Since the tool is out of the factory, a moderately sized jaw pusher and jaw tablet and jaw head box have been installed.

Jaw pusher

2. Pliers piece

3. Jaw box

4. Change the steps in the jaw statement maintenance. These parts are included in the tool.




Using Tips:

Before using, observe the tail end of the retracting hole of the rivet machine to ensure that the claw piece group is opened and the hole is in a state of round hole.

The rear duct should be completely screwed into the oil piston tube, and then locked with the loose nut in reverse rotation; the front and rear ducts are also threaded and should be fully screwed in. If the brake ring bayonet cannot be aligned at the same time After the clamping position of the rear catheter, the front catheter can be rotated slightly in the opposite direction to match the brake ring. Note: The front tube should not be loosened more than one circumference in the opposite direction.




Company Features
1. Shenzhen Pigeon Smart Automation Co.,Ltd offers customers with professional production and product design.
2. PST has a complete quality management system to make Auto Feed Rivet Gun.
3. Environmental protection has been a long tradition of our company. We using technological advances and innovative solutions to minimize the negative impact of our operations on the environment. By combining our industry knowledge with the renewable, recyclable and biodegradable material, we are able to meet customer demand for environmentally optimal products. Ask! We have an environmental-friendly business model that respects man and nature for the long term go. We are working hard on reducing production emission such as waste gas and cut resource waste. Ask! We are committed to the highest standards of excellence across all aspects of our business. We look for opportunities to exceed expectations and strive with determination to win and be the best at what we do.
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...