The full automatic labeling machine can be matched to the assembly line, the flow of the product, on the plane, cambered labeling, to achieve online unmanned labeling, such as matching to the code jet conveyor belt, the flow of the object labeling.
(1)Applicable labels: sticker, adhesive film, electronic supervision code, bar code, etc.
(2)Applicable products: it can be matched with pillow packing machine, automatic assembly line and printing machine to realize online labeling.
(3)Application industry: widely used in packaging, food, toys, daily chemicals, electronics, medicine and other industries.
|labeling speed||40-200pieces per mimute|
|applicable label size||length:6mm-250mm|
bottom paper width:6mm~130mm
|label's drum inner radius||Φ76mm|
|label's largest outer radius||Φ280mm|
|whole machine size(L*W*H)||1100mm*700mm*1450mm|
|applicable power supply||220V/50HZ|
|whole machine weight||70kg|
The price is for reference only and needs to be confirmed with the seller again before placing the order.
GT-01 Automatic metal can labeling machine/fully automatic metal can tin labeling machine/
automatic can labeling machine/hot melt glue labeling machine for tin can/metal tin can labeler
This machine is used for metal tin labeling. The tin rolled into the machine, by the pressure in the tin rolling on the belt drive, when the tin pass through the hot melt adhesive points, can be coated with a hot melt adhesive, along with the moving of tin, the tin part with glue will press the front of the label and stick the label on, and began to be rolled in on the tin. At the same time, the label end was glued by gluing mechanism. With the tin moving on, the label has been affixed to the tin on a roll. Then get out of the machine driven by rolling belt.
This machine has alternately label supply mechanism, no need to stop the machine when add label.
The end glue supply is controlled by tin. It will not supply glue if without tin.
Machines using frequency control can be adjusted according to production requirement.
The machine is only to change a few parts for replacing different size tin, the label adhesive only in
two ends, with less glue and low cost.
2. Technical Parameters:
Labeling capacity 200-500 tins / min (different with the size of tins)
Suitable for tin size, diameter Φ45-114mm
Suitable for tin height (maximum) 270mm
Label Size Width 23-254mm
Labeling glue: Hot melt glue +
Power : three-phase 380V (or on request)
Electric power 2.62Kw
Compressed air 2-4Kg/m2, 10 L/ min
Overall dimension 1855mm × 750mm × 1250mm
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.