An Innovative Manufacturer--Supply One Stop Customized Solution of Industrial Automation Equipments Since 2008

PST  >  AI - Page Sitemap  >  PST low noise auto feed rivet gun factory for electric power tools
PST low noise auto feed rivet gun factory for electric power tools

PST low noise auto feed rivet gun factory for electric power tools

Brand Name
PST
MOQ
1
Material
Metal
Place of Origin
China
Supply Ability
1000pcs/Month
Port
Shenzhen
Packaging Details
Retail package
Payment terms
T/T,Paypal,Western Union
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The direction auto feed rivet gun will develop towards is to meet your requirements. It is noticeable for long-term service life
2. The product has been a focus in the field, becoming more competitive. It saves more than 50% of labor costs
3. The product is corrosion resistant. It has been tested under salt mist, including neutral salt mist and acid-salt spray. Comparing with the same kind of machine abroad, its price is more moderate

Introduction:

700-C2 riveting gun is only applicable when the factory is attached with the applicable size of the nail nozzle, the jaw box head and the jaws and the jaw pusher. 

Before confirming that these fixtures are fixed, the correct parts of these fixtures must be confirmed. And size.

It is advantageous to clean the jaws every 2 to 3 days while the tool is in continuous use, and depending on the number of rivets being fixed, approximately every 3,000 rivets.

The steps to remove the jaws are as follows:

1. Untie the supply of air.

2. Use a screw wrench to loosen the structure of the head and clean the inside of the head frame.

3. Hold the lock nut of the jaw box, unscrew the jaw box, and use the screw wrench from the oil plug to reopen the washer of the lock nut.

4. Release the jaw head from the jaw box and remove the jaw pusher spring, jaw pusher and a jaw.

5. Jaws, jaw thrusters, jaw thruster springs, and jaw box heads. Now use the brush to clean all debris. If it is worn or damaged, replace these parts.

6. The mechanical mechanism of the oil has good quality oil. We strongly recommend that you apply 081 brand jaw oil on the back of the jaw.

081 brand jaw oil is effective for application.


How to maintain it?

Please specify 1/8” (3.2mm), 5/32 (4.0mm) and 3/16” (4.8mm)

The rivet is mounted with a simple change of the nail device without any other changes.

Connect the tool train to the air supply, hold the trigger and press down to know that the nail tip device is loose, reinstall and re-lock; the nail head device can also be changed via the loose head frame.

Since the tool is out of the factory, a moderately sized jaw pusher and jaw tablet and jaw head box have been installed.

Jaw pusher

2. Pliers piece

3. Jaw box

4. Change the steps in the jaw statement maintenance. These parts are included in the tool.


PST low noise auto feed rivet gun factory for electric power tools-1


Using Tips:

Before using, observe the tail end of the retracting hole of the rivet machine to ensure that the claw piece group is opened and the hole is in a state of round hole.

The rear duct should be completely screwed into the oil piston tube, and then locked with the loose nut in reverse rotation; the front and rear ducts are also threaded and should be fully screwed in.

 If the brake ring bayonet cannot be aligned at the same time After the clamping position of the rear catheter, the front catheter can be rotated slightly in the opposite direction to match the brake ring. 

Note: The front tube should not be loosened more than one circumference in the opposite direction.

PST low noise auto feed rivet gun factory for electric power tools-2



Company Features
1. PST has its own laboratory to design and manufacture auto feed rivet gun.
2. We have refined a customer-centric belief system, focusing on delivering a positive experience and providing unparalleled levels of attention and support so customers can focus on growing their business.
PST industrial rivet gun is designed considering different factors. These factors such as the width & length of fabric, appearance, and fabric construction are ensured to comply with the garment standards and regulations. The especially-designed logo can be printed on the product
PST industrial rivet gun is carefully created. Its design sets out with a desired aesthetic in mind. The function is catered to as a secondary factor. It is widely applied in the machinery for its low running resistance
The design concept of PST auto feed rivet gun is framed properly. It has successfully combined functional and aesthetic perspectives into a three-dimensional design. It has low torque capacity when starting and running
Strict quality inspection for PST auto feed rivet gun will be carried out. The product will be checked for cracking of the stitching, the security of the accessories if any, seaming strength, and durability. Adopting ultra-clean steel, the product has obtained an extended bearing life
PST auto feed rivet gun is carefully designed. The key considerations in its designing phase are the functional performance, clothing comfort, human mobility, and esthetics. It has low torque capacity when starting and running
Our quality controllers are responsible for continuous small changes to keep production within the specified parameters and to ensure product quality. It is strong in its rigidity against the radial load
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...